Why does this build show this bottleneck result?

This build pair shows a result because the GeForce GTX 1660 SUPER reaches its limit first at 1440p/144Hz. In AAA Gaming scenarios, this component determines your maximum performance ceiling.

What does a 19% bottleneck mean?

A 19% bottleneck is classified under our canonical scale as a Moderate Variance (10–20%). It indicates that one component waits on the other for approximately 19% of computation cycles during peak load, determining system equilibrium.

How do resolution and refresh rate affect bottlenecks?

Lower resolutions (like 1080p) and high refresh rates increase pressure on the CPU to prepare frames quickly. Higher resolutions (like 4K) shift the heavy lifting to the GPU for rendering. Adjusting these balances the load.

What should I upgrade first for this build?

Your GeForce GTX 1660 SUPER is the limiting factor. Upgrading your graphics card or lowering game settings/resolution will yield the biggest performance gains.

Are bottleneck scores exact?

Use these scores as a guide. Results are estimates; real performance varies by game, settings, drivers, RAM, and thermals. Always verify with real-world benchmarks for your specific titles.

Back to Hub

1440p Bottleneck: AMD Ryzen 7 7800X3D & GeForce GTX 1660 SUPER

Configuration

CPU

AMD Ryzen 7 7800X3D

GPU

GeForce GTX 1660 SUPER

Resolution

Refresh Rate

0%GPU LimitEstimated · not a live measurement

Balance Variance(Equilibrium Band)

10–20%

Moderate Variance

Measures architectural CPU-GPU balance variance. Real-world gaming varies across game engines, scenes, and background load — treat small differences as noise, not signal.

Workload Verdict: Moderate GPU Limitation

High Confidence

At 1440p (144Hz), the graphics card is working significantly harder than the CPU. Lowering heavy visual presets can reduce GPU load. DLSS/FSR Quality can raise FPS versus native rendering at the same output resolution; the gain depends on the game and hardware.

At 1440p / 144Hz, this system is operating with an active GPU limiting factor (19%). A GPU limiting factor is standard and desirable for gaming: your processor keeps the GPU fully fed with frames, producing consistent frametimes with zero micro-stutter.

How was this 0% computed?

This percentage is an estimate, not a live measurement of your games. It is the scaled gap between CPU pressure and GPU pressure at 1440p / 144Hz under your selected workload profile.

CPU pressure combines the CPU Capability Index (84), the workload CPU weight (1.00), and the refresh demand factor (2.26).

GPU pressure combines the GPU Compute Index (59), the workload GPU weight (1.20), and the resolution load factor (1.00).

The weighting scheme is published openly in the "How Our Calculation Works" section on the homepage, alongside its peer-reviewed research basis and stated limitations.

Validation: tested against 16 real-world CPU benchmark pairings (GeForce RTX 4090, 1080p, 5-game suite, Benchmark.pl data) — the model identified the correct limiting side in 87.5% of pairings, and pairings it rated as more CPU-limited showed proportionally less measured headroom (rank correlation 0.85). Scope: one GPU, one resolution, 16 pairings — preliminary evidence, not proof.

Share verdict

Why this result?

We analyze system pressure based on your CPU, GPU, resolution, refresh rate, and workload. Here’s a deep dive into how your bottleneck score was calculated.

System Pressure Breakdown

Pressure shows how close a component is to its performance limit.

CPU Pressure

60%

GPU Pressure

100%

Tip: A higher bar means that component hits its limit first.

Bottleneck Verdict

Summary of the limiting factor.

GPU Ceiling Detected (10–20% Range)

Moderate Variance

The graphics card operates near peak saturation at 1440p.

The graphics card reaches full rasterization and shader utilization first. This is the optimal state for AAA visual fidelity, delivering smooth and predictable frame delivery.

Real-world utilization varies across game engines, scenes, and background load — treat small differences as noise, not signal.

Impact Factors

What pushed the result toward CPU or GPU bound?

CPU Capability

AMD Ryzen 7 7800X3D

Tier Index: 84 / 100

Has plenty of headroom.

GPU Capability

GeForce GTX 1660 SUPER

Tier Index: 59 / 100

Fully utilized (100% load).

Resolution

1440p

Balanced Load

Load Factor: 1.00x

Refresh Rate

144 Hz target

Moderate Demand

Demand Factor: 2.26x

Workload Bias

AAA Gaming

CPU bias: 1.00 · GPU bias: 1.20

GPU Intensive

Interactive Simulator

Change values to see how the bottleneck shifts in real-time.

Resolution

Refresh Rate

Workload

💡

Live Insight

Adjust the toggles above to simulate a new scenario.

Simulating: 1440p @ 144Hz

New Result: GPU (19%)

Explanation

What does this actually mean?

At 1440p and 144Hz, this estimate models a targeted performance scenario for your selected hardware. The visual or compute demand of 1440p is heavy enough that the GPU reaches its limit before the CPU does. Suggestion: Lowering visual settings, reducing render resolution, or using image upscaling where supported can help recover performance.

Confidence Score

Reliability of this estimate.

This estimate has high confidence — Catalog specifications for both components (modeled estimate).

High

Technical Notes

•X3D cache detected

Upgrade Strategy

If you had to upgrade one thing...

Priority: GPU

Your GPU hits a wall before your CPU does.

Best GPUs for this CPU Browse GPUs

Disclaimer

Calculations are estimates based on synthetic benchmarks and common hardware patterns. Real-world performance depends on specific game engine optimizations, background processes, RAM speed, and thermal throttling.

Performance Map

CPU Limited

GPU Limited

Balanced

720p

1080p

1440p

UW 1440p

60 Hz

75 Hz

120 Hz

144 Hz

165 Hz

240 Hz

360 Hz

✨

Sweet Spot

1440p @ 60Hz (12% BN)

Larger nodes indicate higher bottleneck variance.

Practical Recommendations

Resolution Strategy

•1080p Competitive: Ensure your CPU is strong. This resolution relies heavily on processor speed for high framerates.
•1440p / 4K Gaming: Shift load to the GPU. If you have a CPU bottleneck, increasing resolution can actually make gameplay smoother by balancing the pacing.

Upgrade Paths

Compare AMD Ryzen 7 7800X3D Compare GeForce GTX 1660 SUPER

Loading analysis...

Performance Analysis Summary

The graphical demands of 1440p push the GeForce GTX 1660 SUPER to near-peak utilization (estimated 10–20% GPU ceiling), which is ideal for delivering smooth, consistent frame delivery in AAA titles.

This configuration operates in a healthy visual ceiling. The processor will not restrict frame times, and the graphics card dictates overall visual throughput.

Real-world utilization varies across game engines, scenes, and background load — treat small differences as noise, not signal.

VRAM Headroom: The GeForce GTX 1660 SUPER features 6GB of VRAM. At resolutions higher than 1080p, demanding modern titles may saturate this buffer, leading to texture swapping and frame pacing dips.

Estimated 1440p Gaming Performance

Counter-Strike 2

178FPS

Ultra Settings

Forza Horizon 5

71FPS

Ultra Settings

Black Myth: Wukong

38FPS

Ultra Settings

* Frame rates are algorithmically estimated using the DPI index and hardware specs. Real-world performance may vary depending on RAM speed, cooling, and game updates.

Resolution Specific FAQ

Is this build recommended for 1440p?

Our DPI engine scored this pairing as 81% Stable for 1440p. There are some significant imbalances that may affect performance.