Why does this build show this bottleneck result?

This build pair shows a result because the GeForce RTX 4070 GDDR6 reaches its limit first at 4K/60Hz. In AAA Gaming scenarios, this component determines your maximum performance ceiling.

What does a 10% bottleneck mean?

A 10% bottleneck is classified under our canonical scale as a Minor Variance (1–10%). It indicates that one component waits on the other for approximately 10% of computation cycles during peak load, determining system equilibrium.

How do resolution and refresh rate affect bottlenecks?

Lower resolutions (like 1080p) and high refresh rates increase pressure on the CPU to prepare frames quickly. Higher resolutions (like 4K) shift the heavy lifting to the GPU for rendering. Adjusting these balances the load.

What should I upgrade first for this build?

Your GeForce RTX 4070 GDDR6 is the limiting factor. Upgrading your graphics card or lowering game settings/resolution will yield the biggest performance gains.

Are bottleneck scores exact?

Use these scores as a guide. Results are estimates; real performance varies by game, settings, drivers, RAM, and thermals. Always verify with real-world benchmarks for your specific titles.

Back to Hub

4K Ultra HD: AMD Ryzen 7 7800X3D & GeForce RTX 4070 GDDR6

Configuration

CPU

AMD Ryzen 7 7800X3D

GPU

GeForce RTX 4070 GDDR6

Resolution

Refresh Rate

0%GPU LimitEstimated · not a live measurement

Balance Variance(Equilibrium Band)

1–10%

Minor Variance

Measures architectural CPU-GPU balance variance. Real-world gaming varies across game engines, scenes, and background load — treat small differences as noise, not signal.

Workload Verdict: Minor GPU Variance

High Confidence

Minor GPU rasterization limit at 4K (60Hz). This is the standard, healthy gaming condition for smooth frame pacing.

At 4K / 60Hz, this system is operating with an active GPU limiting factor (10%). A GPU limiting factor is standard and desirable for gaming: your processor keeps the GPU fully fed with frames, producing consistent frametimes with zero micro-stutter.

How was this 0% computed?

This percentage is an estimate, not a live measurement of your games. It is the scaled gap between CPU pressure and GPU pressure at 4K / 60Hz under your selected workload profile.

CPU pressure combines the CPU Capability Index (84), the workload CPU weight (1.00), and the refresh demand factor (1.00).

GPU pressure combines the GPU Compute Index (80), the workload GPU weight (1.20), and the resolution load factor (1.30).

The weighting scheme is published openly in the "How Our Calculation Works" section on the homepage, alongside its peer-reviewed research basis and stated limitations.

Validation: tested against 16 real-world CPU benchmark pairings (GeForce RTX 4090, 1080p, 5-game suite, Benchmark.pl data) — the model identified the correct limiting side in 87.5% of pairings, and pairings it rated as more CPU-limited showed proportionally less measured headroom (rank correlation 0.85). Scope: one GPU, one resolution, 16 pairings — preliminary evidence, not proof.

Share verdict

Why this result?

We analyze system pressure based on your CPU, GPU, resolution, refresh rate, and workload. Here’s a deep dive into how your bottleneck score was calculated.

System Pressure Breakdown

Pressure shows how close a component is to its performance limit.

CPU Pressure

58%

GPU Pressure

100%

Tip: A higher bar means that component hits its limit first.

Bottleneck Verdict

Summary of the limiting factor.

GPU Ceiling Detected (1–10% Range)

Minor Variance

The graphics card operates near peak saturation at 4K.

The graphics card reaches full rasterization and shader utilization first. This is the optimal state for AAA visual fidelity, delivering smooth and predictable frame delivery.

Real-world utilization varies across game engines, scenes, and background load — treat small differences as noise, not signal.

Impact Factors

What pushed the result toward CPU or GPU bound?

CPU Capability

AMD Ryzen 7 7800X3D

Tier Index: 84 / 100

Has plenty of headroom.

GPU Capability

GeForce RTX 4070 GDDR6

Tier Index: 80 / 100

Struggling with 4K pixel count.

Resolution

High GPU Strain

Load Factor: 1.30x

Refresh Rate

60 Hz target

Low CPU Demand

Demand Factor: 1.00x

Workload Bias

AAA Gaming

CPU bias: 1.00 · GPU bias: 1.20

GPU Intensive

Interactive Simulator

Change values to see how the bottleneck shifts in real-time.

Resolution

Refresh Rate

Workload

💡

Live Insight

Adjust the toggles above to simulate a new scenario.

Simulating: 4K @ 60Hz

New Result: GPU (10%)

Explanation

What does this actually mean?

At 4K and 60Hz, this estimate models a targeted performance scenario for your selected hardware. The visual or compute demand of 4K is heavy enough that the GPU reaches its limit before the CPU does. Suggestion: Lowering visual settings, reducing render resolution, or using image upscaling where supported can help recover performance.

Confidence Score

Reliability of this estimate.

This estimate has high confidence — Catalog specifications for both components (modeled estimate).

High

Technical Notes

•X3D cache detected

Upgrade Strategy

If you had to upgrade one thing...

Priority: GPU

Your GPU hits a wall before your CPU does.

Best GPUs for this CPU Browse GPUs

Disclaimer

Calculations are estimates based on synthetic benchmarks and common hardware patterns. Real-world performance depends on specific game engine optimizations, background processes, RAM speed, and thermal throttling.

Performance Map

CPU Limited

GPU Limited

Balanced

720p

1080p

1440p

UW 1440p

60 Hz

75 Hz

120 Hz

144 Hz

165 Hz

240 Hz

360 Hz

✨

Sweet Spot

1440p @ 60Hz (4% BN)

Larger nodes indicate higher bottleneck variance.

Practical Recommendations

Resolution Strategy

•1080p Competitive: Ensure your CPU is strong. This resolution relies heavily on processor speed for high framerates.
•1440p / 4K Gaming: Shift load to the GPU. If you have a CPU bottleneck, increasing resolution can actually make gameplay smoother by balancing the pacing.

Upgrade Paths

Compare AMD Ryzen 7 7800X3D Compare GeForce RTX 4070 GDDR6

Loading analysis...

Performance Analysis Summary

At 4K, the GeForce RTX 4070 GDDR6 becomes the primary workload ceiling, placing this pairing in the 1–10% GPU-bound equilibrium band.

A GPU-bound condition is the preferred state for gaming. Operating near 97–99% GPU utilization ensures maximum visual fidelity and consistent frame pacing without CPU-induced micro-stutters.

Real-world utilization varies across game engines, scenes, and background load — treat small differences as noise, not signal.

Estimated 4K Gaming Performance

Forza Horizon 5

109FPS

Ultra Settings

Cyberpunk 2077

62FPS

Ultra Settings

Call of Duty: Warzone

117FPS

Ultra Settings

* Frame rates are algorithmically estimated using the DPI index and hardware specs. Real-world performance may vary depending on RAM speed, cooling, and game updates.

4K Fidelity Report

4K Bottleneck Severity

At 4K, the GPU workload is extreme. Our pressure analysis shows that the GeForce RTX 4070 GDDR6 is the primary performance factor. Even with this power, you may need to use upscaling (DLSS/FSR) for stable path-tracing or ultra settings.